PVC Floor Copper bush and DOP seal banbury internal mixer 120L 300KW 1200kg / h

1. Introduction of Product
300KW 1200kg/h Copper bush and DOP seal 120L Banbury Internal Mixer Machine For PVC Floor

2. Description:

• Mixing volume of mixing cabinet ………120L
• Main motor power: 300KW, 8P, AC, Siemens brand
• Rear rotor speed: 42 rpm
• Ratio of front and rear rotor speed: 1:1.17
• Discharge type: downward
• Colling type: water
• rotor shaft: biserial self-aligning roller shaft
• Electrical control: controlled by PLC, brand of Mitsubishi.
• the decelerator with hard-facing gear makes it's transmission steady, least noisy and everlasting.
• Rotor: edges and corners are wearable, welded by welding rod
• discharge door can be openned when poweroff
• Contactor: LG brand
• Equipped with the banbury mixer: hydraulic station,libritorium,DOP oiling device,Electric control cabinet,operating console

3. Equipment list
1 main body 1 group
2 press hammer and cylinder 1 group
3 material feeding device 1 group
4 discharge device 1 group
5 transmission device 1 group
6 electric control device 1 group
7 oil pressure and lubricate device 1 group
8 tubing 1 group


4. Applications:
Banbury mixer is the best machine for mixing of big quantity plastic and rubber material.
1. The diversity of rotor type can meet different mixing requirements.User can choose any kind of rotors(the mixer with different rotor has different total volume and working volume.
2. Drive sysyem adopts DC motor or AC inverter motor to realize stepless speed adjustment or adopts Acmotor with gear box etc.The drive system has the advantages of steady drive,lower noise and long service life etc.
3. The standard rotr adopts the right drive system.According to users needs we also can supply the left drive system.
4. Drive sysyem adopts DC motor or AC inverter motor to realize stepless speed adjustment or adopts Acmotor with gear box etc.The drive system has the advantages of steady drive,lower noise and long service life etc.
5. On-site operation cabinets and electrical control cabinets adopt PLC communication,results in reduction of equipment troubles and installation cost.

5.Main Technical Parameter:

6. Competitive Advantage:
1. PLC control system
2. Lower noise,safer mixer
3. Excellent dispersing effect
4. Best mixing chamber to get 100% mixing effect.
5. Fast mixing, good effectivity
6. Easier Maintenance.
7. Long life.
8. No leakage.

7. Service:

1. Oversea installation guide.
2. Oversea test running
3. Oversea worker training
4. Technical support
5. supply of spare parts
6. Technical operation support
7. Formula and processing support

8. Option
The intermediate of the kneading-room is mainly made of alloy steel. Its surface is hard-plated with chromium, beautiful and wear-resisting. In the middle of the alloy steel rotor is a hole which can cool or heat the rotor by oil or vapour(oil heating or vapour heating) The projecting part of the rotor is made of hard alloy with hardened surface, smooth, shining and lasts well. Since we applied the advanced foreign high-tech, we get excellent result in sealing. Discharge door is actuated by hydraulic rotary actuator, discharges quickly and smoothly.

9. Commercial Terms
1. Payment: 30% by T/T as advance payment, balance(70%) by T/T before shipment
2. Lead Time: 60 days after receiving the advance payment
3. Transportation: container, simple package ( PE film, salver)
4.Warranty period: From the day of the use of the machine in the buyer’s factory:
(1) The mechanical Parts: 12 months
(2) The electrical Parts: 6 months
5. Installations and Commissioning
(1)Commissioning will have been made before shipment
(2)Overseas Commissioning and charges
one or two technicians will be sent to the buyer to guide the installation and commissioning of the equipment if the customerrequests.
Customers need to pay the charge of our technicians.
(1) Round-trip Airplane Ticket
(2) Charges of transportation, accommodation and communication
(3) The allowance for the technicians is USD 80 per day for one person.
(4) An interpreter is needed.
6. Spare parts:
Spare parts for one year are needed for the customers, and we suggest that customers should buy the spare parts. (Fittings list will be provided.)
7. English manual, Figuration drawing and footing drawings are provided.

Zhangjiagang Flame Machinery Co., Ltd is located in national civilization hygienic city close to Shanghai, which is specialized in producing rubber and plastic machinery, including internal mixer, open mill, calendaring machine, extruder production line and recycling production line ,etc. We aim at providing the best quality of products and service to all customers, through continuously improving and developing.

Until now through continually practicing and improving, we already formed a high quality team including advanced talents. We have strictly control system in the products researching, producing, assembling, testing and deliver. Meanwhile we will ensure the market competitiveness and customer applicability by innovating and improving the design and quality of the product.

Flame company insists the management idea of “ excellent quality, integrity manage, high quality after-sales service” ,so that we can win more and more customer’s trust and support from home and abroad .Providing profitable machinery for customers and getting their acceptation are our final success!

Warmly welcomed domestic and oversea customers to visit and inspect our factory, creating mutual benefit for both of us!