1. Introduction of Product
100L Drop Door Type Banbury Mixer For Artificial Leather And PVC
Film
Name | Banbury Mixer | Heating Way | Oil Or Steam |
Type | Drop door Or Internal | Feature | It is mainly used for plasticizing, mixing and final mixing the
stock |
rotors | Chrome Plated and Alloy Hardfacing Electrodes |
Material | Cast Steel | Connect Way | cardan |
capacity | 120-150 Kg/batch | Certificate | CE |
2. Description:
1. Used for rubber mixing rubber.
2. Intermeshing type of rotor.
3. Tangential type of rotor.
4. High efficiency and quality.
5. Durability.
6. Easy maintenance.
7. Low consumption.
3. Equipment list
1 main body 1 group
2 press hammer and cylinder 1 group
3 material feeding device 1 group
4 discharge device 1 group
5 transmission device 1 group
6 electric control device 1 group
7 oil pressure and lubricate device 1 group
8 tubing 1 group
4. Applications:
1.Different type of rotors can satisfy the mixing technical
requirement.
2.Rotor chamber,discharge door and ram are circulation-cooled.with
TCU, it can guarantee the quality of mixed rubber compound.
3.Touch surface of rotor,chamber,discharge door,ram and others
contacting with mixing rubber is plated with chrome or
wear-resistant hard metal.
4.Hydraulic type sealing structure gurrantees the closed grain of
the adhesive meterials.
5.Upper ram is hydraulic or pneumatic pressure type, which can
control the press continuously.
6.The floating weight is falling type, driven by gear and hydraulic
oil tank with good sealing performance.
7.Various driving system matchs the customers’ requirement.
8.Control system is adopted with PLC system.
5. Main Technical Parameter:
|
Project / model | X-75L | X-100L | X-120L | X-160L |
Total volume of Mixer | 75 | 100 | 120 | 160 |
Rotating speed of rear rotor (r/min) | 40 | 40 | 40 | 40 |
Speed ratio | 1:1.17 | 1:1.17 | 1:1.17 | 1:1.17 |
Main motor power(kw) | 160 | 220 | 310 | 355 |
Weight(t) | 20 | 24 | 26 | 26 |
6. Competitive Advantage:
1. PLC control system
2. Lower noise,safer mixer
3. Excellent dispersing effect
4. Best mixing chamber to get 100% mixing effect.
5. Fast mixing, good effectivity
6. Easier Maintenance.
7. Long life.
8. No leakage.
7.Service:
1. Oversea installation guide.
2. Oversea test running
3. Oversea worker training
4. Technical support
5. supply of spare parts
6. Technical operation support
7. Formula and processing support
8. Option
Two rotors mixer the relative rotation, the material from the feed
mouth clamp into the roll gap by rotor extruding and shearing,
after() through the roll gap above the top tied pien is divided
into two parts, respectively along the chamber wall and the gap
between the rotor before and after the return to roll gap above.In
a week around the rotor flow, material is influenced by the shear
and friction action, make rubber temperature rise sharply, lower
viscosity, increased the wettability on the surface of the rubber
in the compound, make good contact with rubber and compound
surface.
9. Commercial Terms
1. Delivery period: totally 6 months after the contact is
confirmed.
2. Payment: 30% of the total amount by T/T in advance as down
payment, 70% of total amount by T/T before shipment.
3. Spare parts: The seller will provide a set of valueless
vulnerable parts for free. The seller also suggests the buyer to
buy a set of spare parts which meets one year’s use again. The
seller will show the list of spare parts to the buyer for his
choose before delivery.
4. Appearance and color: appearance and color of the machines are
based on the seller’s standard. Of course, we can also custom-made
according to buyer’s request.
5. Electric power: The quotation above is based on 380V/50Hz. There
will be some additional fee and extended producing time for
custom-built electric power requirement.
6. Warranty period:
6-1. Machines: one year after successful debugging;
6-2. Electrical components: 6 months after successful debugging.
7. Debugging service and cost borne by Foreign:
7-1. The seller will send three or four technical workers (or more
as buyer’s request) to the place which appointed by the buyer for
the guidance of equipment installation and the debugging service;
7-2. Both buyer and seller should bear their corresponding charge
as below:
7-2-1. The seller is in charge of the fee cost in China but except
for the visa charge;
7-2-2. The buyer is in charge of the fee cost in Foreign and the
visa charge. This fee includes but not limited to the followings:
a. Round-trip ticket;
b. Transportation, meals, accommodation and communication fee
during business trip;
c. Allowance (manpower fee) USD 80.00 for per person a day (days
calculation: total days from the day on the business trip to
returning to China);
d. Translator: The buyer should hire a translator for the seller's
technical workers convenient field work communication, and for
completing the task successfully. Otherwise the seller will send an
additional translator. The buyer should be in charge of this cost
(refer to a~d).
