Single Screw plastic pelletizing process , Planetary Roller
Extruder Ф150 - 255mm
1. Introduction of Product
Planetary Roller Extruder And Single Screw Extruder Pelletizing
Production Line
2. Quick Detail:
Planetary Roller Extruder And Single Screw Extruder Pelletizing
Production Line is mainly use to produce
plastic particles,such as PVC and PET.The plasticizing effect of the equipment is good. It is convenient
for cleaning ,and can effectively reduce raw material cost and
power consumption.
3. Description:
1 | SRL Mixing Unit | 1 set |
2 | PRE Planetary Extruder | 1 set |
3 | Single Screw Extruder | 1 set |
4 | Mould | 1 set |
5 | Cutting and Blowing Device | 1 set |
6 | Control Cabinet | 1 set |
7 | Temperature Controller | 4-5 sets |
4. Applications:
Usually the first compounding extruder runs at a high speed for
good mixing and high output capacity.The second extruder must be a
larger diameter single screw one that can run at lower screw speed
.The lower screw can avoid over –heating by internal cooling system
and strong heat exchange ability .The functional separation allows
operator to more flexibly control the expectable material mixing
process and temperature.
5. Specifications:
Type | Extruder type | Screw diameter(mm) | Main motor power(Kw) |
PRE-137/150 | Planet | Ф137 | 55 |
Single Screw | Ф150 | 55 |
PRE-150/200 | Planet | Ф150 | 75 |
Single Screw | Ф200 | 75 |
PRE-190/220 | Planet | Ф190 | 132 |
Single Screw | Ф220 | 132 |
PRE-220/250 | Planet | Ф220 | 200 |
Single Screw | Ф250 | 200 |
PRE-250/300 | Planet | Ф250 | 250 |
Single Screw | Ф300 | 250 |
PRE-300/350 | Planet | Ф300 | 315 |
Single Screw | Ф350 | 315 |
6. Competitive Advantage:
7. Service:
1. Oversea installation guide.
2. Oversea test running
3. Ovsersea worker training
4. Technical support
5. Spare parts supply
6. Technical operation support
7. Formula and processing support
8. Option
Planetary roller extruder unit consists of planetary extruder,one
stage extruder and auxiliary machinery. The big screw which is
located in the center of the planetary extruder drives several
small screws. It makes the contact surface bigger and the good
effective of heat exchange which can reduce the residence time of
material after liquation. So that we can reduce the cost of
stabilizers and lubricants. The material comes from planetary
extruder will be further plastified by one stage extruder and then
sized dicing,cooling and bagging.
9. Commercial Terms
1. Payment: 30% by T/T as advance payment, balance(70%) by T/T
before shipment
2. Lead Time: 60 days after receiving the advance payment
3. Transportation: container, simple package ( PE film, salver)
4.Warranty period: From the day of the use of the machine in the
buyer’s factory:
(1) The mechanical Parts: 12 months
(2) The electrical Parts: 6 months
5. Installations and Commissioning
(1) Up to date commissioning has been made before shipment
(2) Overseas Commissioning and charges
one or two technicians will be sent to the buyer to guide the
installation and commissioning of the equipment if the customer
requests.
Customers pay the charge of our technicians.
(1) Round-trip Airplane Ticket
(2) Charges of transportation, accommodation and communication
(3) The allowance for the technicians is USD 80 per day for one
person.
(4) An interpreter is needed.
6. Spare parts:
Spare parts for one year are needed for the customers, and we
suggest that customers should buy the spare parts. (Fittings list
will be provided.)
7. English manual, Figuration drawing, and footing drawings are
provided.
